DigitalBeef and 701x cutover: what your registry should do first
Before any registry software cutover, export every table with its links intact, keep a dated snapshot, and plan how you will prove the move worked: record counts, pedigree spot checks and a before and after COI sample. Run the old and new systems side by side for a set window, settle payments and DNA verification in writing, and have the board decide who can search pedigrees.

On this page
This guide is for the board, registrar and secretary of an association whose registry runs on DigitalBeef or 701x, or on any system about to change. It applies whether you stay with your vendor or leave: a cutover inside the same vendor still moves your records, and the same checks protect you either way.
What is changing with DigitalBeef and 701x?
701x, a cattle technology company, acquired DigitalBeef, a registry software company, in September 2024 [2][3]. 701x's own announcement (external site) says DigitalBeef's registry "serves cattle and sheep associations and their members" and that the two companies' software would be integrated [1]. American Cattlemen's coverage (external site) put the number at 17 beef cattle associations [2].
The clearest picture of what that means for one association comes from the American Dexter Cattle Association. The minutes of its board meeting on March 3, 2026 (external site) record that the association was informed that "all associations must transition" to the new 701x system "by the end of 2026" [4]. That is what the Dexter board was told. The 701x announcement cited above does not mention a deadline, so check the date and terms with your own vendor contact and get them in writing.
The same minutes show the practical questions a board runs into during a move [4]:
- Features arrive in phases. Registration, transfers and reports were due first. The inbreeding coefficient calculation was set for a later date.
- Data needed checking after the transfer. Two directors reported discrepancies, and members were asked to email any they found.
- Payments needed their own integration. The treasurer noted that payments would go through Square and had to be coordinated with 701x.
- DNA parent verification changed. Members would attach a PDF of their parent verification report at registration, with registrars reviewing it by hand for the first year.
- The board had a policy decision to make about keeping pedigree search closed or open to the public.
- Member guides waited on the interface. One director recommended holding off on how-to lessons until the new screens were live.
None of this is unusual for a registry changing systems. The rest of this guide takes these questions in order.
What should your registry export before any move?
Export everything, in a format you can open without the vendor, and keep a dated copy the board controls. Ask for CSV files, one per table, with the column names and any codes explained. A PDF report is a record of what the data looked like; it is not the data.
Ask for each of these by name:
- Animals. Every registered animal, with registration number, name, sex, birth date, status and any tattoo, tag or other identifier.
- Pedigree links. Sire and dam for every animal, by registration number, not by name. Names change. Numbers should not.
- Registration numbers and numbering rules. Including prefixes, retired numbers and any numbers reserved but not yet issued.
- Transfers. The full ownership history with dates, not only the current owner.
- Owners, breeders and members. With member numbers, so a transfer record can be matched to a person.
- DNA results. Genotypes, parent verification outcomes, lab case numbers and which animal each belongs to.
- Health tests. Test, result, date and lab or certifying body.
- Certificates and images. Scanned papers, photos and any files attached to an animal's record, with a list that ties each file to an animal.
- Everything else. Performance data, show results, notes and pending applications. Ask the vendor for a list of every table and tick each one off.
Save the full export as a dated, read-only snapshot, for example "registry-export-2026-11-15", and store it where at least two officers can reach it. Every later check compares against this copy.
The Dexter minutes show why the identifiers matter. A regional director described one bull with two lab case numbers and conflicting markers, and the registrar explained that these mismatches often start when an animal's name changes after genotyping [4]. If your export ties DNA results to registration numbers, that kind of error is far easier to find.
How do you check the records after the transfer?
You prove a transfer worked by comparing the new system with your snapshot, on purpose, before members find the gaps for you.
- Count the records. Compare the number of animals, owners, transfers, DNA results and health tests in the snapshot with the new system. Every difference needs an explanation.
- Spot check pedigrees. Pick a sample that includes old animals, recent litters or calves, imports and animals with incomplete parentage. Walk each one back several generations in both systems.
- Compare COI on a sample. Calculate the inbreeding coefficient for the same set of animals before and after, using the same number of generations. A changed value usually means a broken or duplicated pedigree link.
- Check the edge cases. Animals with the same name, animals that changed names, deceased or exported animals, and transfers that were pending on cutover day.
- Log every discrepancy. Record what was wrong, who fixed it and how, so the board has a record of the move.
If the new system has not switched on COI yet, as in the Dexter timeline [4], save the old values with your snapshot now. You will want them to compare against once the calculation is live.
Should you run the old and new systems in parallel?
Yes, for a short, fixed window. Keep the old system read-only once the new one is the official record, so members and registrars can look something up without anyone entering new work in two places.
- Pick a cutover date away from your busy season, and from that date enter new registrations and transfers in one place only.
- Keep the old system readable for a set period, and write down the end date.
- Decide where pending applications finish, old system or new, and tell members which.
How do payments and DNA verification hand off?
Treat payments and DNA verification as separate projects with their own owners, not as features that come along with the move.
For payments, the treasurer should know who processes the money, how fees are changed, how refunds work and how records reach the books. Test a real fee, a refund and a failed payment before go live. The Dexter board submitted its Square integration request with 701x ahead of time [4], which is the right instinct.
For DNA, decide how a parent verification result reaches the registry. It may be a direct link to the lab, a PDF upload or a manual entry. Write down who reviews it and for how long. The Dexter plan to have registrars review uploads by hand for the first year [4] is a sensible safeguard for any registry while a new process settles in.
Who decides whether pedigree search is public?
The board does, and it should be a recorded decision. A public pedigree search helps buyers confirm an animal is registered and helps the breed's reputation. A members only search protects breeders' privacy and can be a reason to join. A middle option is to show pedigrees publicly and keep owner details private. Whatever you choose, write down what a visitor can see, what a member can see, and who can change it.
What should members get after go live?
Members need short, task based guides written against the live screens: how to register an animal, transfer one, upload a DNA report, pay dues and find a pedigree. Writing them too early wastes the work if the interface changes, which is why the Dexter board held off [4]. Plan the guides for the first weeks after go live, and name one contact members can email with questions.
Your cutover checklist
- Get the cutover date and terms from your vendor in writing.
- Request a full CSV export of every table, with column definitions.
- Save a dated, read-only snapshot that two officers can reach.
- Record counts for each table in the snapshot.
- Save COI values for a sample of animals.
- After the transfer, compare counts, spot check pedigrees and compare the COI sample.
- Log and fix every discrepancy before go live.
- Set the parallel window and the date the old system becomes read-only.
- Test a payment, a refund and a failed payment.
- Write down the DNA verification process and who reviews it.
- Record the board's decision on public or members only pedigree search.
- Publish member guides against the live screens and name a contact.
Where Breed Ledger fits
I built Breed Ledger for breed clubs, associations and registries. It runs a studbook with an approval queue, calculates COI with Wright's path method, imports Embark PDFs and pedigrees, issues digital certificates with a QR code anyone can verify, and moves animals between members with no transfer fee. I help every club move its records in at no charge. Breed Ledger has a free plan for clubs with up to 50 active members, and full export of all of a club's data on every plan is coming soon. If your board is weighing a move, book a demo.
Frequently asked questions
Does every DigitalBeef association have to move by the end of 2026?
The American Dexter Cattle Association's March 2026 minutes say the association was told all associations must transition to the new 701x system by the end of 2026 [4]. Confirm your own association's date with your vendor.
Is a PDF report a good enough export?
No. Keep PDF reports as a record, but ask for the data itself as CSV files, one per table, so another system can read it.
Sources
- 701x, "701x Acquires DigitalBeef LLC" (25 September 2024), https://www.701x.com/post/701x-acquires-digialbeef-llc (external site), checked 2026-11-09.
- American Cattlemen, "701x Acquires DigitalBeef LLC" (25 September 2024), https://americancattlemen.com/701x-acquires-digitalbeef-llc/ (external site), checked 2026-11-09.
- Beef Magazine, "701x acquires DigitalBeef", https://www.beefmagazine.com/farm-business-management/701x-acquires-digitalbeef (external site), checked 2026-11-09.
- American Dexter Cattle Association, "Board of Directors Meeting, March 3, 2026" (minutes), https://dextercattle.org/wp-content/uploads/2026/03/BOD-Meeting-3-3-2026.pdf (external site), checked 2026-11-09.
